Tuesday, November 30, 2021

Comparison of the best Furminator deShedding tools

Furminator brushes and deshedding tools are classics. They have already seduced millions of owners throughout the world. Below you will find tips on how to choose the perfect deShedding tool for your dog.

We have made a comparison of the best Furminator dog deShedding tool for you. 

It is difficult to rank the Furminator dog deShedding tools because they are all to be recommended. However, you can pay attention to the details and especially choose the model: for small or large dogs, for long or short hair …

Furminator deShedding tool for long-haired dogs

Furminator deShedding tool for long-haired dogs


  • several sizes available
  • removes 90% of dead hair
  • not very painful for the dog

This Furminator grooming deShedding tool is made for dogs with long hair. It comes in four different sizes: S, M, L and XL.

This material, like all the Furminator brand, is of excellent quality. You can see from the picture of the deShedding tool¬† that the handle is ergonomic. It is easy to grip and has a good hold. This is handy if you have a large dog and you have 20 minutes of brushing to do on the grooming table every week…

If you use the furminator regularly, your dog’s hair loss is reduced by up to 90%. When you know the ordeal of picking up hair in the house, this figure is enough to make any owner dream.

The Furminator’s teeth are quite small. It is therefore sometimes complicated to remove the knots as can have breeds like the Cavalier King Charles. But, these fine teeth have a real advantage: they reduce the pain felt by the dog when a knot is attacked. It is then advisable to go back several times, trying to go around the knot to remove it. Once you understand how to do it, it’s a breeze.

I now use a Furminator deShedding tool for Jodie and it is much more practical than the previous currycomb that seemed to hurt her every time…


Furminator anti-shedding brush for short hair

Furminator anti-shedding brush for short hair


  • effective on rare hairs
  • several sizes
  • attractive price


  • voluminous

If the previous model was for long-haired dogs, this one is its counterpart for short-haired dogs. It comes in three sizes: S, M, L.

It is important to take the right deShedding tool, adapted to your pet’s coat. Indeed, the sizes of the blades are different and obviously, the impact on the efficiency of the brush is enormous.

Contrary to popular belief, short hair is not easier to manage than long hair. When you get your Furminator deShedding tool, brush your dog several days in a row. You’ll see the crazy amount of hair on the floor after you’ve done your work.

Then, after a week of daily use, you can move on to one or two brushings per year with variations depending on whether your dog is moulting or not. The results of the Furminator are excellent.

The price of the Furminator deShedding tool is advantageous on Amazon as this product attests. Usually, you can find it in pet stores for double and it’s even worse at veterinarians.

This comb is relatively sturdy and you can expect to keep it for several years.


Large hard brush Furminator

Large hard brush Furminator


  • gentle brushing
  • good combing action for curly hair
  • large brush surface


  • difficult for recalcitrant knots

This model of Furminator brush is different from the previous two. The others, with blades and teeth, cut perfectly the hairs and the knots.

This one contains hard spikes. It is not made for short hair, but for medium-long, long or curly hair. The width of the brush ensures a rather quick maintenance.

The brushing is quite soft with this type of equipment and some dogs even end up enjoying it. On the other hand, it is a little hard to remove all the knots on dogs that tend to have them. If this is the case with your dog, choose one of the two combs shown above.

The guard that comes with the brush is not the most practical and most owners end up never putting it on. If you do, be sure to store the brush with the tips down because it could hurt your fingers the next time you reach for it…

How to choose a Furminator brush for dogs?

Choosing a Furminator deShedding tool is not very complicated since there are few models. This is often the case with good manufacturers. They don’t need to offer fifty different dog accessories. They base their products on a few good ones and the quality does the rest: all owners adopt it.

When buying your Furminator dog deShedding tool, simply check its size and its target (long, short, curly hair…) rather than focusing on the color of the handle.

On the day of brushing, do it dry. If it comes after a bath, give the dog a good scrub. Dry hair makes it easier to sort out dead and live hair.

After use, be sure to clean the blades. At first, it is disturbing to see large clumps falling from your dog, but you will soon realize that this will not harm your dog’s coat. On the contrary, it will look even better and housekeeping will be easier!

Know that the deShedding tool does not hurt the dog. In fact, if you think about it, it is less frightening than the razors you use on your skin. Pain can happen at the nodes. So avoid pulling the skin in these areas and cut as best you can with the deShedding tool.

Why choose the Furminator over other deShedding tools?

There is no shortage of dog deShedding tools. However, in just a few years, the Furminator has become the preferred tool of owners. Why?

Having tried it, my first surprise is how quickly and well it cuts. That’s the main thing. As a Cavalier King Charles owner, I have spent a lot of time trying to cut knots of hair and the Furminator does it better than any currycomb.

As for brushing, it is very effective. The ergonomic handle means that you can spend fifteen minutes brushing your dog’s coat without any difficulty. Brushing your dog becomes a pleasant moment.

Another advantage of the Furminator is that despite its sharp blades, the dog does not feel any pain. It does not cause scratches unless you are a bully.

Moreover, we can see that the Furminator brand really knows dogs because it offers different models depending on the type of hair of your dog. This is quite normal because a short-haired coat and a long-haired coat are not at all the same, but nevertheless, few deShedding tools make the distinction.

Regarding the frequency of brushing, I recommend that you do it at least once a week. The more frequently you use the Furminator, the less snags there will be and the better the coat will look. In addition, frequent brushing gets the dog used to it and he will eventually stop fearing it and let it be done.

Once the session is over, cover the Furminator blade with a protective cover to limit wear and tear and put it away until the next brushing!

How useful was this post?

Click on a star to rate it!

Average rating 4.7 / 5. Vote count: 13

No votes so far! Be the first to rate this post.

Latest Posts

Latest articles

How to choose your poop bag accessory

Comparison of the best dog poop bags

When it comes to picking up poop on the street, there is often only one solution: the poop bag. Whether you pick up manually or...
dog training pad

How to teach your dog to go on the training mat?

Potty training is perhaps the most difficult part of the process for the owner. There's nothing worse than finding that your doggie has urinated...
dog is running after a tennis ball

Comparison of the best ball launchers for dogs

To thrive, a dog needs to play. If you don't have the ability or inclination to throw the ball for hours, buying an automatic...
dog house

How to heat a dog house in winter?

Are you afraid that your dog will end up freezing in its kennel during cold weather? It's a good thought, because animals are indeed...
dog shaving

Comparison of the best dog clippers

While he spends his time shedding, the dog has "fragile" hair. If you trim your dog's hair with the wrong product, you'll damage his...